configure tacacs-accounting server timeout
ExtremeWare Software 7.3.0 Command Reference Guide 839
configure tacacs-accounting server timeout
configure tacacs-accounting (primary|secondary) server <ipaddress> timeout
<seconds>
Description
Configures the timeout interval for TACACS+ accounting authentication requests for the primary or
secondary server.
Syntax Description
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for TACACS+ accounting authentication requests. When
the timeout has expired, another authentication attempt will be made to the next alternative TACACS+
accounting server.
Example
The following command configures the timeout interval for TACACS+ accounting authentication to 10
seconds:
configure tacacs-accounting primary server 192.168.12.12 timeout 10
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ipaddress Specifies the IP address of the primary or secondary server.
seconds Specifies the number of seconds for authentication requests. Range is 3 to
120 seconds