unconfigure rip
ExtremeWare Software 7.3.0 Command Reference Guide 1391
unconfigure rip
unconfigure rip {vlan <vlan name>}
Description
Resets all RIP parameters to the default VLAN.
Syntax Description
Default
All.
Usage Guidelines
Does not change the enable/disable state of the RIP settings.
Example
The following command deletes RIP configuration from the VLAN finance:
unconfigure rip finance
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
To Next Page
Loading...