configure bgp peer-group password
ExtremeWare Software 7.3.0 Command Reference Guide 1437
configure bgp peer-group password
configure bgp peer-group <peer group> password {encrypted} [none |
<password>]
Description
Configures the password for a peer group and all neighbors of the peer group.
Syntax Description
Default
N/A.
Usage Guidelines
Changes made to the parameters of a peer group are applied to all neighbors in the peer group.
Modifying the following parameters automatically disables and enables the neighbors before changes
take effect:
• remote-as
• timer
• source-interface
• soft-in-reset
• password
Example
The following command configures the password as Extreme for the peer group outer and its neighbors:
configure bgp peer-group outer password extreme
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
peer group Specifies a peer group.
encrypted Specifies an encrypted password.
none Specifies no password.
password Specifies a password.
To Next Page
Loading...
Need help?
General
