Extreme Networks ExtremeWare - Enable Sflow Backoff-Threshold

enable sflow backoff-threshold
ExtremeWare Software 7.3.0 Command Reference Guide 699
enable sflow backoff-threshold
enable sflow backoff-threshold
Description
Enables the sFlow backoff-threshold feature, limiting the maximum number of packets sent to the sFlow
collector per second.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command enables the backoff threshold feature, which is used to limit the number of packets sent
to the sFlow collector in a second. The backoff threshold is set by using the following command:
configure sflow backoff-threshold
If the number of packets sent to the collector exceeds the limit set by the configure sflow
backoff-threshold command, the sampling rate will be doubled.
The backoff threshold is enabled when the enable sflow backoff-threshold command is executed
and the sample frequency set by the
configure sflow sample-rate command is greater than 0 (zero).
The following command disables the sFlow backoff threshold feature:
disable sflow backoff-threshold
Example
The following command enables the sFlow backoff threshold feature:
enable sflow backoff-threshold
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.