532 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
disable slb gogo-mode
disable slb gogo-mode <port number> {all}
Description
Disables GoGo mode processing.
Syntax Description
Default
GoGo mode is disabled by default.
Usage Guidelines
Before you disable GoGo mode, disconnect the servers, as they all have identical MAC and IP
addresses, which can cause VLAN conflicts.
To enable GoGo mode, use the following command:
enable slb gogo-mode
Example
The following command disables GoGo mode for the group with port 29 as the master port:
disable slb gogo-mode 29
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
port number Specifies the GoGo mode master port.
all Disables all health checking.
To Next Page
Loading...