1268 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
configure isis delete vlan
configure isis delete vlan [<vlan name> | all]
Description
Disables IS-IS routing on a routing interface.
Syntax Description
Default
By default, IS-IS is not enabled on an interface.
Usage Guidelines
None.
Example
The following command disables IS-IS on all VLANs.
configure isis delete vlan all
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies the name of a VLAN.
all Specifies all VLANs.
To Next Page
Loading...