1378 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
show ospf area
show ospf area <area identifier>
Description
Displays information about a particular OSPF area.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command displays information about OSPF area 1.2.3.4:
show ospf area 1.2.3.4
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
area identifier Specifies an OSPF area.
To Next Page
Loading...