show iparp proxy
ExtremeWare Software 7.3.0 Command Reference Guide 1239
show iparp proxy
show iparp proxy {<ip address> {<mask>}}
Description
Displays the proxy ARP table.
Syntax Description
Default
N/A.
Usage Guidelines
If no argument is specified, then all proxy ARP entries are displayed.
Example
The following command displays the proxy ARP table:
show iparp proxy 10.1.1.5/24
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ip address Specifies an IP address.
mask Specifies a subnet mask.
To Next Page
Loading...