enable eaps
ExtremeWare Software 7.3.0 Command Reference Guide 989
enable eaps
enable eaps {<name>}
Description
Enables the EAPS function for a named domain or for an entire switch.
Syntax Description
Default
Disabled.
Default command enables for the entire switch.
Usage Guidelines
EDP must be enabled on the switch and EAPS ring ports.
Example
The following command disables the EAPS function for entire switch:
enable eaps
The following command disables the EAPS function for the domain “eaps-1”:
enable eaps eaps-1
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the “i” series platforms.
name Specifies the name of an EAPS domain.
To Next Page
Loading...