show qostype ingress priority
ExtremeWare Software 7.3.0 Command Reference Guide 1895
show qostype ingress priority
show qostype ingress priority
Description
Displays ingress QoS priority settings.
Syntax Description
This command has no syntax or values.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays the ingress QoS traffic grouping priority settings for this switch:
show qostype ingress priority
Following is sample output from this command:
Ingress QoS Type Priority
Application 5
Diffserv 3
Vlan 2
Dot1p 1
History
This command was first available in ExtremeWare 7.0.1.
This command was modified in ExtremeWare 7.2 to include the application criteria.
Platform Availability
This command is available on
“3”
series I/O modules only.
To Next Page
Loading...