configure tacacs server timeout
ExtremeWare Software 7.3.0 Command Reference Guide 835
configure tacacs server timeout
configure tacacs (primary |secondary) server <ipaddress> timeout <seconds>
Description
Configures the timeout interval for TACAS+ authentication requests for the primary and secondary
servers.
Syntax Description
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for TACACS+ authentication requests. When the timeout
has expired, another authentication attempt will be made to the next alternative authentication method.
Example
The following command configures the timeout interval for TACACS+ authentication to 10 seconds:
configure tacacs primary server 192.168.14.8 timeout 10
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ipaddress Specifies the IP address of the primary or secondary server.
seconds Specifies the number of seconds for authentication requests. Range is 3 to
120 seconds
To Next Page
Loading...
Need help?
General
