1340 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
disable ospf originate-router-id
disable ospf originate-router-id
Description
Disables distribution of a route for the OSPF router ID in the router LSA.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
When this function is enabled, OSPF includes a link with the router ID IP address and a mask of
255.255.255.255 in the router LSA. The link type is stub and the metric is 0.
When disabled, OSPF does not include a link with the router ID IP address in the router LSA
Example
The following command disables the distribution of a route for the OSPF router ID in the router LSA:
disable ospf originate-router-id
History
This command was available in an ExtremeWare IP Technology Services Release based on v6.1.8b12.
Platform Availability
This command is available on the BlackDiamond switch only.
To Next Page
Loading...