show sflow statistics
ExtremeWare Software 7.3.0 Command Reference Guide 741
show sflow statistics
show sflow statistics
Description
Displays sFlow statistics.
Syntax Description
This command has no arguments or variables
Default
N/A.
Usage Guidelines
This command displays sFlow statistics collected on all enabled ports. (No per port status is displayed.)
The following fields are displayed:
• Received frames—Number of frames received on sFlow enabled ports
• Sampled Frames—Number of frames scheduled for sending to collector(s)
• Transmitted Frames—Number of UDP packets sent to remote collector(s)
• Broadcast Frames—Number of broadcast frames received on sFlow enabled ports
• Multicast Frames—Number of multicast frames received on sFlow enabled ports
• Zero Sampling rate—
• No Receivers—
Example
To display sFlow statistics for your system, use the following command:
show sflow statistics
The output from this command is similar to the following:
SFLOW Statistics
Received frames : 1159044921
Sampled Frames : 104944
Transmitted Frames : 10518
Broadcast Frames : 0
Multicast Frames : 1055652
Zero Sampling rate : 0
No Receivers : 0
To Next Page
Loading...