88 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Accessing the Switch
disable clipaging
disable clipaging
Description
Disables pausing at the end of each show screen.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
The command line interface (CLI) is designed for use in a VT100 environment. Most
show
command
output will pause when the display reaches the end of a page. This command disables the pause
mechanism and allows the display to print continuously to the screen.
NOTE
Press [q] and then press [Return] to force a pause when CLI paging is disabled.
To view the status of CLI paging on the switch, use the
show management
command. The
show
management
command displays information about the switch including the enable/disable state for CLI
paging.
Example
The follow command disables clipaging and allows you to print continuously to the screen:
disable clipaging
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...
Need help?
General
