configure ssl privkey pregenerated
ExtremeWare Software 7.3.0 Command Reference Guide 831
configure ssl privkey pregenerated
configure ssl privkey pregenerated
Description
Obtains the pre-generated private key from the user.
Syntax Description
This command has no parameters or variables.
Default
N/A.
Usage Guidelines
This command will also be used when downloading/uploading the configuration. The private key will
be stored in the uploaded configuration file in an encrypted format using a hard coded passphrase.
Hence the private key information in the configuration file should not be modified.
The certificate and private key file should be in PEM format and generated using RSA as the
cryptography algorithm.
Example
The following command obtains the pre-generated private key from the user:
configure ssl privkey pregenerated
Next, the user will open the certificate and then file, copy, and paste the certificate into the
console/telnet session, followed by a “.” (period) to end the command.
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
To Next Page
Loading...
Need help?
General
