Extreme Networks ExtremeWare - Run Ipmcfdb-Check

run ipmcfdb-check
ExtremeWare Software 7.3.0 Command Reference Guide 1541
run ipmcfdb-check
run ipmcfdb-check [index <bucket> <entry> | <IP multicast group> <source IP
address> vlan <vlan name>] {extended} {detail}
Description
Checks IP multicast FDB entries for consistency.
Syntax Description
Default
N/A.
Usage Guidelines
The FDB error checking function logs the error count into the system log. Use the detail option to log
more detailed debug information.
Example
The following command runs a consistency check on the FDB entries for the IP multicast group
168.192.2.4:
run ipmcfdb-check 168.192.2.4 195.1.1.100 vlan lab1 extended detail
History
This command was first available in ExtremeWare 6.1.9.
Platform Availability
This command is available on all platforms.
bucket Specifies the bucket portion of the FDB hash index.
entry Specifies the entry portion of the FDB hash index.
IP multicast group Specifies a multicast group. FDB entries with this group will be checked.
source IP address Specifies an IP source address.
vlan name Specifies a VLAN name. FDB entries for this VLAN with the specified
multicast group number will be checked.
extended Enables OTP index checking in the MAC entry and VPST of the egress port.
detail Specifies that more detailed debug information should be logged.