682 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
disable sys-health-check
disable sys-health-check
Description
Disables the BlackDiamond system health checker.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
If the system health checker is disabled, it does not test I/O modules, MSM modules, and the backplane
for system faults.
Example
The following command disables the BlackDiamond system health checker:
disable sys-health-check
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on BlackDiamond switches only.
To Next Page
Loading...