794 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure radius timeout
configure radius timeout <seconds>
Description
Configures the timeout interval for RADIUS authentication requests.
Syntax Description
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for RADIUS authentication requests. When the timeout
has expired, another authentication attempt will be made. After three failed attempts to authenticate,
the alternate server will be used. After five failed attempts, local user authentication will be used.
Example
This example configures the timeout interval for RADIUS authentication to 10 seconds. After 30 seconds
(three attempts), the alternate RADIUS server will be used. After 50 seconds (five attempts) local user
authentication is used:
configure radius timeout 10
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
seconds Specifies the number of seconds for authentication requests. Range is 3 to
120 seconds
To Next Page
Loading...