Extreme Networks ExtremeWare - Enable Arp-Learning Ports

enable arp-learning ports
ExtremeWare Software 7.3.0 Command Reference Guide 893
enable arp-learning ports
enable arp-learning ports <portlist>
Description
Enables the ARP-learning feature on a port or ports.
Syntax Description
Default
By default, arp-learning is enabled.
Usage Guidelines
None.
Example
N/A.
History
This command was first available in ExtremeWare 7.3.
Platform Availability
This command is available on all platforms.
portlist Specifies the ingress port(s) on which this rule is applied.
any specifies that the rule will be applied to all ports.