Extreme Networks ExtremeWare User Manual

configure ospf metric-table
ExtremeWare Software 7.3.0 Command Reference Guide 1307
configure ospf metric-table
configure ospf metric-table 10M <cost> 100M <cost> 1G <cost> {10G <cost>}
Description
Configures the automatic interface costs for 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps interfaces.
Syntax Description
Default
• 10 Mbps—The default cost is 10.
• 100 Mbps—The default cost is 5.
• 1 Gbps—The default cost is 4.
• 10 Gbps—The default cost is 2.
Usage Guidelines
None.
Example
The following command configures the automatic interface costs for 10 Mbps,
100 Mbps, and 1 Gbps interfaces:
configure ospf metric-table 10m 20 100m 10 1g 2
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
cost Specifies the interface cost for the indicated interfaces.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English