unconfig inline-power violation-precedence ports
ExtremeWare Software 7.3.0 Command Reference Guide 1937
unconfig inline-power violation-precedence ports
unconfig inline-power violation-precedence ports <portlist>
Description
Resets violation precedence to the default value for the specified ports.
Syntax Description
Default
The default violation precedence value is max-class-operator.
Usage Guidelines
This command resets the violation precedence configured with the following command:
config inline-power violation-precedence [advertised-class | operator-limit | max-class-operator | none]
ports <portlist>
Example
The following command resets the violation precedence to its default value for port 3 on slot 1:
unconfig inline-power violation-precedence ports 1:3
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
portlist Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
To Next Page
Loading...