828 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure ssl certificate pregenerated
configure ssl certificate pregenerated
Description
Obtains the pre-generated certificate from the user.
Syntax Description
This command has no parameters or variables.
Default
N/A.
Usage Guidelines
This command is also used when downloading/ uploading the configuration. The certificate
information stored in the uploaded configuration file should not be modified, because it is signed using
the issuer’s private key.
The certificate and private key file should be in PEM format and generated using RSA as the
cryptography algorithm.
Example
The following command obtains the pre-generated certificate from the user:
configure ssl certificate pregenerated
Next, the user will open the certificate and then file, copy, and paste the certificate into the
console/telnet session, followed by a “.” (period) to end the command.
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
To Next Page
Loading...
Need help?
General
