enable tacacs-authorization
ExtremeWare Software 7.3.0 Command Reference Guide 909
enable tacacs-authorization
enable tacacs-authorization
Description
Enables CLI command authorization.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
When enabled, each command is transmitted to the remote TACACS+ server for authorization before
the command is executed.
Example
The following command enables TACACS+ command authorization for the switch:
enable tacacs-authorization
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...