configure isis metric-size
ExtremeWare Software 7.3.0 Command Reference Guide 1273
configure isis metric-size
configure isis [level-2 | area <isis area identifier>] metric-size [regular
| wide | both]
Description
Configures the size of the metric originated in the LSP for the level 2 subdomain or level 1 area.
Syntax Description
Default
The default setting is
regular
.
Usage Guidelines
The
regular
option indicates that the metric can have a maximum value of 63 (as specified in the basic
specifications). The
wide
option indicates that the metric can have a maximum value of 4,261,412,864 (as
specified in the traffic engineering draft). The
both
option indicates that the metric should be described
in both formats.
You can only use this command when IS-IS is disabled.
Example
The following command configures the metric size as
both
for the level 2 subdomain:
confit isis level-2 metric-size both
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
isis area identifier Specifies an area identifier.
To Next Page
Loading...