776 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure auth netlogin radius-accounting
configure auth netlogin radius-accounting primary <ipaddress> [secondary
<ipaddress>]
Description
Configure the use of RADIUS accounting servers for netlogin session accounting.
Syntax Description
Default
N/A.
Usage Guidelines
The RADIUS accounting servers should be configured before this command. This command returns an
error if the given primary and secondary RADIUS servers are not configured or if RADIUS
authentication is not configured for netlogin sessions.
Example
configure auth netlogin radius-accounting primary 192.168.14.12 secondary
192.168.14.55
History
This command was first available in ExtremeWare 7.3.
Platform Availability
This command is available on all platforms.
ipaddress Specifies the IP addresses of the primary and secondary servers.
To Next Page
Loading...