888 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
disable web https
disable web https
Description
Disables secured HTTP access (HTTPS) to the switch on the default HTTPS port (443).
Syntax Description
This command has no parameters or variables.
Default
Enabled.
Usage Guidelines
Use this command to disable HTTPS before changing the certificate or private key.
Example
The following command disables HTTPS on the default port:
disable web https
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
To Next Page
Loading...