enable icmp unreachables
ExtremeWare Software 7.3.0 Command Reference Guide 1219
enable icmp unreachables
enable icmp unreachables {vlan <vlan name>}
Description
Enables the generation of ICMP unreachable messages on one or all VLANs.
Syntax Description
Default
Enabled.
Usage Guidelines
None.
Example
The following command enables the generation of ICMP unreachable messages on all VLANs:
enable icmp unreachables
History
This command was available in ExtremeWare 2.0.
This command was modified in an ExtremeWare IP Technology Services Release based on ExtremeWare
v6.1.8b12 to support MPLS modules.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
To Next Page
Loading...