924 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
show arp-learning vlan ports
show arp-learning vlan <vlan name> port <portlist>
Description
Displays the ARP-learning configuration for a port in the given vlan.
Syntax Description
Default
By default, arp-learning is enabled.
Usage Guidelines
None.
Example
N/A.
History
This command was first available in ExtremeWare 7.3.
Platform Availability
This command is available on all platforms.
vlan name Specifies the vlan to which the rule applies.
portlist Specifies the ports to which the rule applies.
To Next Page
Loading...
Need help?
General
