946 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
show wireless ports interface pae-diagnostics
show wireless ports [<portlist> | all] interface [1 | 2] pae-diagnostics
Description
Displays Port Authentication Entity (PAE) diagnostics for the selected port and interface.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display the PAE diagnostics of the clients associated with the access point (AP).
Examples
The following example lists the output of the PAE diagnostics for ports 1:11 on interface 2:
show wireless ports 1:11 interface 2 pae-diagnostics
The output of the command is similar to:
PAE Diagnostic Statistics
CLIENT MAC Port Intf Failures Timeouts Success Logoffs ReAuth
================================================================================
00:0D:54:98:AC:35 1:25 1 0 0 2 0 0
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
To Next Page
Loading...
Need help?
General
