312 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
unconfigure slot
unconfigure slot <slot number>
Description
Clears a slot of a previously assigned module type.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command clears slot 4 of a previously assigned module type:
unconfigure slots 4
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on modular switches only.
slot number Specifies a slot on a modular switch.
To Next Page
Loading...