Extreme Networks ExtremeWare - Configure Radius-Accounting Server Timeout

configure radius-accounting server timeout
ExtremeWare Software 7.3.0 Command Reference Guide 799
configure radius-accounting server timeout
configure radius-accounting (primary|secondary) server <ipaddress> timeout
<seconds>
Description
Configures the timeout interval for RADIUS-Accounting authentication requests for the primary and
secondary servers.
Syntax Description
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for RADIUS-Accounting authentication requests for the
primary and secondary servers. When the timeout has expired, another authentication attempt will be
made. After three failed attempts to authenticate, the alternate server will be used.
Example
This example configures the timeout interval for RADIUS-Accounting authentication to 10 seconds.
After 30 seconds (three attempts), the alternate RADIUS server will be used:
configure radius-accounting secondary server 192.168.4.12 timeout 10
History
This command was first available in ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ipaddress Specifies the IP address of the primary or secondary server.
seconds Specifies the number of seconds for authentication requests. Range is 3 to
120 seconds