558 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
enable slb gogo-mode
enable slb gogo-mode <port number> grouping <port list>
Description
Enables GoGo mode processing for a group of ports.
Syntax Description
Default
GoGo mode is disabled by default.
Usage Guidelines
To disable GoGo mode, use the following command:
disable slb gogo-mode
Example
The following command enables GoGo mode for the group containing ports 15, 17, 19-23, and 25-30
with port 29 as the master port:
enable slb gogo-mode 29 grouping 15, 17, 19 - 23, 25 - 30
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
port number Specifies the GoGo mode master port.
port list Specifies a range or list of ports assigned to the group.
To Next Page
Loading...