1574 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
configure ipxsap vlan max-packet-size
configure ipxsap vlan [<vlan name> | all] max-packet-size <number>
Description
Configures the MTU size of the IPX/SAP packets.
Syntax Description
Default
The default setting is 432 bytes.
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command configures an MTU size of
356
bytes for the IPX/SAP packets on VLAN
accounting
:
configure ipxsap vlan accounting max-packet-size 356
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
max-packet-size <number> Specifies the maximum packet size in bytes.
To Next Page
Loading...