310 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
unconfigure ports display string
unconfigure ports <portlist> display-string
Description
Clears the user-defined display string from one or more ports.
Syntax Description
Default
N/A.
Usage Guidelines
This command removes the display string that you configured using the
configure ports
display-string
command.
On a modular switch,
<portlist>
can be a list of slots and ports. On a stand-alone switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see
“Modular Switch
Numerical Ranges” or “Stand-alone Switch Numerical Ranges” in Chapter 1.
Example
The following command clears the user-defined display from port 4 on a stand-alone switch:
unconfigure ports 4 display-string
The following command clears the user-defined display string from slot 2, port 4 on a modular switch:
unconfigure ports 2:4 display-string
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
To Next Page
Loading...