Extreme Networks ExtremeWare User Manual

1424 ExtremeWare Software 7.3.0 Command Reference Guide
BGP Commands
configure bgp neighbor source-interface
configure bgp neighbor [<ip address> | all] source-interface [any | vlan
<vlan name>]
Description
Changes the BGP source interface for TCP connections.
Syntax Description
Default
Any.
Usage Guidelines
None.
Example
The following command changes the BGP source interface on the VLAN accounting:
configure bgp neighbor 192.168.1.5 source-interface vlan accounting
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
ip address Specifies an IP address.
all Specifies all neighbors.
any Specifies any source interface.
vlan name Specifies a VLAN name as a source interface for TCP.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English