disable sflow ports
ExtremeWare Software 7.3.0 Command Reference Guide 681
disable sflow ports
disable sflow ports <portlist>
Description
Disables sFlow statistical packet sampling on a particular list of ports.
Syntax Description
Default
Disabled.
Usage Guidelines
This command disables sFlow on a particular list of ports. Once sFlow is disabled on a port, sampling
and polling will stop on that port. If sFlow is disabled globally, all sampling and polling stops.
Use the following command to disable sFlow globally:
disable sflow
Sampling and polling must first be stopped on every port through the
disable sflow ports
command before all ports can be disabled globally with the
disable sflow
command.
Example
The following command disables sFlow sampling on port 3:1:
disable sflow ports 3:1
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
portlist Specifies a list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5,
2:6-2:8.
To Next Page
Loading...