Extreme Networks ExtremeWare - Enable Slb L4-Port

enable slb L4-port
ExtremeWare Software 7.3.0 Command Reference Guide 563
enable slb L4-port
enable slb L4-port [ftp | http | https | imap4 | ldap | nntp | pop3 | smtp
| socks | telnet | tftp | web | wildcard | www | <TCP or UDP port number>]
Description
Enables an SLB port.
Syntax Description
Default
Layer 4 ports are enabled by default.
Usage Guidelines
To disable a layer 4 port, use the following command:
disable slb L4-port
Example
The following command enables SLB for FTP ports:
enable slb L4-port ftp
History
This command was first available in ExtremeWare 6.1.
ftp Specifies an FTP node.
http Specifies an HTTP node.
https Specifies an HTTPS node.
imap4 Specifies an IMAP4 node.
ldap Specifies an LDAP node.
nntp Specifies an NNTP node.
pop3 Specifies a POP3 node.
smtp Specifies an SMTP node.
socks Specifies a SOCKS node.
telnet Specifies a telnet node.
tftp Specifies a TFTP node.
web Specifies a Web node.
wildcard Specifies any port associated with a wildcard server.
www Specifies a www node
TCP or UDP port number Specifies a TCP or UDP port for the node.