EasyManua.ls Logo

Extreme Networks ExtremeWare - Configure Slb Vip Service-Check Frequency

Extreme Networks ExtremeWare
2254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
configure slb vip service-check frequency
ExtremeWare Software 7.3.0 Command Reference Guide 509
configure slb vip service-check frequency
configure slb vip <vip name> service-check frequency <seconds> timeout
<seconds>
Description
Configures the layer 7 service check frequency and timeout for a particular virtual server.
Syntax Description
Default
The default frequency is 60 seconds.
The default timeout is 180 seconds.
Usage Guidelines
The frequency must be less than the timeout.
To return to the global values, specify 0 for frequency and timeout. To set the global service check
frequency and timeout, use the following command:
configure slb global service-check
Example
The following command sets the service check frequency to 15 and timeout to 45 for the virtual server
“ftp”:
configure slb vip ftp service-check frequency 15 timeout 45
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
vip name Specifies a virtual server.
frequency Specifies the frequency of the service check. The range is 15 to 300 seconds.
timeout Specifies the timeout of the service check. The range is 5 to 300 seconds.

Table of Contents

Related product manuals