configure ipxrip vlan import-filter
ExtremeWare Software 7.3.0 Command Reference Guide 1563
configure ipxrip vlan import-filter
configure ipxrip vlan [<vlan name> | all] import-filter [none |
<access_profile>]
Description
Assigns an import route filter to an ingress VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
Only the network ID matching the import filter will be added to the IPX route table.
Example
The following command assigns an import route filter to ingress VLAN
accounting
:
configure ipxrip vlan accounting import-filter my-profile
History
This command was introduced in ExtremeWare 4.0;
access-profile
s modified in version 6.1.5b20.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
none Specifies no import filters.
access_profile Specifies an access profile name.
To Next Page
Loading...