show pim
ExtremeWare Software 7.3.0 Command Reference Guide 1551
show pim
show pim {detail | rp-set {<IP multicast group>}| vlan <vlan name>}
Description
Displays the PIM configuration and statistics.
Syntax Description
Default
If no VLAN is specified, the configuration is displayed for all PIM interfaces.
If no multicast group is specified for the
rp-set
option (Rendezvous Point set), all groups are
displayed.
Usage Guidelines
The
detail
version of this command displays the global statistics for PIM register and register-stop
packets.
Example
The following command displays the PIM configuration and statistics for the VLAN accounting:
show pim accounting
History
This command was first available in ExtremeWare 4.0.
The
rp-set
option was added in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
detail Specifies to display the detailed format.
IP multicast group Specifies an IP multicast group.
vlan name Specifies a VLAN name.
To Next Page
Loading...