disable wireless ports interface ap-scan
ExtremeWare Software 7.3.0 Command Reference Guide 2045
disable wireless ports interface ap-scan
disable wireless ports <portlist> interface [1 |2] ap-scan
Description
Stops an on-channel wireless port scan for the indicated port or ports and interface for the Altitude 300.
Syntax Description
Default
N/A.
Usage Guidelines
When the scan feature is disabled, entries slowly age out of the scan results table until it is empty. If the
scan is restarted, the table values from the previous scan will be kept.
Example
The following command disables interface 2 on ports 1:18 to 1:28:
disable wireless ports 1:18-1:28 interface 2 ap-scan
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
To Next Page
Loading...
Need help?
General
