1560 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
configure ipxrip delete vlan
configure ipxrip delete vlan [<vlan name> | all]
Description
Disables IPX/RIP on one or all interfaces.
Syntax Description
Default
N/A.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command disables IPX/RIP on VLAN
backbone
:
configure ipxrip delete vlan backbone
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
To Next Page
Loading...