Extreme Networks ExtremeWare - Clear Wireless Ports Interface Ap-Scan Results

clear wireless ports interface ap-scan results
ExtremeWare Software 7.3.0 Command Reference Guide 1991
clear wireless ports interface ap-scan results
clear wireless ports [<portlist> | all] interface [1 | 2] ap-scan results
Description
This command clears the scan results table.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to clear the access point (AP) scan results on any interface: 1 or 2.
Examples
The following command clears the AP scan result table for port 1:18 on interface 1:
clear wireless port 1:18 interface 1 ap-scan results
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.