configure mpls rsvp-te delete lsp
ExtremeWare Software 7.3.0 Command Reference Guide 1793
configure mpls rsvp-te delete lsp
configure mpls rsvp-te delete lsp [<lsp_name> | all]
Description
Deletes an RSVP-TE LSP.
Syntax Description
Default
N/A.
Usage Guidelines
Deleting an LSP name disassociates all configured paths with this LSP and all configuration information
for the LSP name is deleted. LSPs cannot be deleted if the specified
<lsp_name>
has been configured as
the LSP for a TLS tunnel. If you specify the
all
keyword, all LSPs not associated with a TLS tunnel are
deleted.
Example
The following command deletes all RSVP-TE LSPs:
configure mpls rsvp-te delete lsp all
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
lsp_name Specifies the name of the LSP.
To Next Page
Loading...