698 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
enable sflow
enable sflow
Description
Globally enables sFlow statistical packet sampling.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command enables sFlow globally on the switch. Sflow must be enabled globally before a “per data
source” sFlow can be enabled through the following command:
enable sflow ports <portlist>
Example
The following command enables sFlow sampling globally:
enable sflow
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...