758 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
unconfigure transceiver-test window
unconfigure transceiver-test window
Description
Returns the transceiver test window to the factory default of eight 20-second windows.
Syntax Description
The command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this feature when the switch can be brought off-line.
This configuration provides a sliding window. When you return to the default window, the switch
checks for errors within the last eight 20-second windows.
Extreme Networks does not recommend changing the default transceiver test window. The default is
adequate for most networks.
Example
The following command returns the transceiver test window to eight 20-second windows:
configure transceiver-test window
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on modular switches only.
To Next Page
Loading...