enable ip-option use-router-alert
ExtremeWare Software 7.3.0 Command Reference Guide 1229
enable ip-option use-router-alert
enable ip-option use-router-alert
Description
Enables the generation of the router alert IP option.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
None.
Example
The following command enables generation of the router alert IP option:
enable ip-option use-router-alert
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...