configure slb gogo-mode service-check timer
ExtremeWare Software 7.3.0 Command Reference Guide 483
configure slb gogo-mode service-check timer
configure slb gogo-mode <port number> service-check timer [all | ftp | http
| telnet | smtp | nntp | pop3 | <TCP port number>] frequency <seconds>
timeout <seconds>
Description
Overrides the global service-check frequency and timeout values.
Syntax Description
Default
The default frequency is 60 seconds.
The default timeout is 180 seconds.
Usage Guidelines
You can use this command at any time. This command affects the frequency and timeout for the
specified service-check in the specified GoGo mode group.
The frequency must be less than the timeout.
Example
The following command configures GoGo mode FTP service check for the group with port 29 as the
master port with a frequency of 15 seconds and a timeout of 45 seconds:
configure slb gogo-mode 29 service-check timer ftp frequency 15 timeout 45
History
This command was first available in ExtremeWare 6.1.5.
port number Specifies the GoGo mode master port.
all Specifies all service checks.
ftp Specifies the FTP service check.
http Specifies the HTTP service check.
telnet Specifies the telnet service check.
smtp Specifies the SMTP service check.
nntp Specifies the NNTP service check.
pop3 Specifies the POP3 service check.
TCP port number Specifies a TCP port, instead of a service, for the service check.
frequency Specifies the frequency of the service check. The range is 15 to 300 seconds.
timeout Specifies the timeout of the service check. The range is 15 to 300 seconds.
To Next Page
Loading...
Need help?
General
