914 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
enable web https
enable web https
Description
Enables secure HTTP access (HTTPS) to the switch on the default HTTPS port (443).
Syntax Description
This command has no parameters or variables.
Default
Enabled.
Usage Guidelines
Use this command to allow users to connect using a more secure HTTPS connection.
Example
The following command enables HTTPS on the default port:
enable web https
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
To Next Page
Loading...
Need help?
General
