982 ExtremeWare Software 7.3.0 Command Reference Guide
EAPS Commands
configure eaps shared-port link-id
configure eaps shared-port <port> link-id <id>
Description
Configures the link ID of the shared port.
Syntax Description
Default
N/A.
Usage Guidelines
Each common link in the EAPS network must have a unique link ID. The controller and partner shared
ports belonging to the same common link must have matching link IDs. No other instance in the
network should have that link ID.
Example
The following command configures the EAPS shared port 1:1 to have a link ID of 1.
configure eaps shared-port 1:1 link-id 1
History
This command was first available in ExtremeWare 7.1.
Platform Availability
This command is available on the “i” series platforms.
port Specifies the port number of the common link port.
id Specifies the link ID of the port.
To Next Page
Loading...
Need help?
General
